IDES Prospector Already have an account? Login Here

IDES

Marvel™ M60

Polyethylene

Supplied by SCG Chemicals Co., Ltd.

The technical datasheet with complete property values for Marvel™ M60 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
M60 is an economical color compound for general-purpose rotomolding applications. The resin is specifically formulated to have a balance of stiffness and toughness with good processability. It is recommended for cost-conscious or non-critical applications, such as small to medium size containers, bins, ice-box, etc. M60 comes with both antioxidants and medium level UV stabilizers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Additive 
  • Antioxidant
  • UV Stabilizer
  
Features 
  • Antioxidant
  • General Purpose
  • Good Processability
  • Good Stiffness
  • Good Toughness
  • Recyclable Material
Uses 
  • Containers
  • General Purpose
  
Forms 
  • Granules
  • Powder
  
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Izod Impact (73°F)
psi
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Peak Melting Temperature
°F
 ASTM D2117
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marvel™ M60, Marvel M60, Marvel™ , Marvel, MarvelM60, M 60, M60, Polyethylene, Unspecified, Polyethylene Unspecified, PE, Unspecified, PE Unspecified, Polyethylene, PE, SCG, PolyethyleneUnspecified, PEUnspecified, 60M
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Stiffness, Good Toughness, Tough.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.