IDES Prospector Already have an account? Login Here

IDES

Marvel™ M735

Linear Low Density Polyethylene

Supplied by SCG Chemicals Co., Ltd.

The technical datasheet with complete property values for Marvel™ M735 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
M735 is a linear-low density polyethylene provides an excellent processability with a balancing of impact and stiffness. M735 is suitable for rotational molding of container and general applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • Food Contact Acceptable
  • General Purpose
  • Good Impact Resistance
  • Good Processability
  • Good Stiffness
  • Good Surface Finish
  • Good Toughness
  • High Gloss
  • Recyclable Material
Uses 
  • Automotive Applications
  • Containers
  • General Purpose
  • Lawn and Garden Equipment
  • Toys
Agency Ratings 
 
Forms 
  • Pellets
  • Powder
  
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
ARM Impact - Rotomolded (-40°F, 0.20 in)
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Peak Melting Temperature
°F
 ASTM D2117
Peak Crystallization Temperature (DSC)
°F
 ASTM D2117
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marvel™ M735, Marvel M735, Marvel™ , Marvel, MarvelM735, M 735, M735, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, SCG, PolyethyleneLinearLowDensity, 735M
Features
Features may also be described by the following terms: Good Impact Resistance, Good Processability, Easy Processing, Good Stiffness, High Gloss, Good Surface Finish, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Lawn and Garden Equipment, Lawn Equipment, Garden Equipment.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), TIS (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.