SABIC® LDPE 2008TN00 SABIC Polyethylene, Low Density

Product Description

SABIC® LDPE 2008TN00 is a LDPE tubular grade without additives. SABIC® LDPE 2008TN00 is produced using SABIC Clean Tubular Reactor (CTR) Technology which ensure grades with high purity. It exhibits high toughness with good flexibility and reasonable environmental stress cracking resistance and is therefore typically used for flexibles and tough articles.

General

Material Status

Commercial: Active

Availability

Europe

Features

Good Flexibility

Good Toughness

High ESCR (Stress Crack Resist.)

High Purity

Uses

Caps

Closures

Compounding

Masterbatch

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/2.16 kg		g/10 min
190°C/5.0 kg		g/10 min
Melt Volume-Flow Rate (MVR)			ISO 1133
190°C/2.16 kg		in³/10min
190°C/5.0 kg		in³/10min
Environmental Stress-Cracking Resistance² (140°F, 0.118 in, Rhodacal-DS10)		hr	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (Injection Molded)		psi	ISO 527-2/1A/50
Tensile Stress			ISO 527-2/1A/50
Yield, Injection Molded		psi
Break, Injection Molded		psi
Tensile Strain (Break, Injection Molded)		%	ISO 527-2/1A/50
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength			ISO 180/A
-22°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)		°F	ASTM D648
Vicat Softening Temperature		°F	ISO 306/A
Melting Temperature		°F	DIN 53765
Enthalpy Change		J/g	DIN 53765
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 2008TN00, SABIC LDPE 2008TN00, SABIC® LDPE , SABIC LDPE, SABICLDPE2008TN00, SABICLDPE, LDPE 2008 TN 00, LDPE2008TN00, LDPE2008, LDPE, 2008 TN 00, 2008TN00, 2008TN, TN00, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, TN2008, 2008LDPE
Features
Features may also be described by the following terms: Good Flexibility, Flexible, High Purity, Good Toughness, Tough, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Compounding, Compounds.

Notes

¹Typical properties: these are not to be construed as specifications.

²2 MPa

SABIC® LDPE 2008TN00

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)