IDES Prospector Already have an account? Login Here

IDES

SABIC® LDPE 2102TN00W

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LDPE 2102TN00W is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® LDPE 2102TN00W is a general purpose grade without addtives.
This grade offers a high output and an excellent draw down.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • General Purpose
  • Good Drawdown
  
Uses 
  • Film
  • General Purpose
  • Laminates
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (Blown Film)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Modulus
     ISO 527-3
MD: 0.98 mil, Blown Film
psi
  
TD: 0.98 mil, Blown Film
psi
  
Tensile Stress
     ISO 527-3
MD: Yield, 0.98 mil, Blown Film
psi
  
TD: Yield, 0.98 mil, Blown Film
psi
  
MD: Break, 0.98 mil, Blown Film
psi
  
TD: Break, 0.98 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 0.98 mil, Blown Film
%
  
TD: Break, 0.98 mil, Blown Film
%
  
Impact
Nominal Value
Unit
Test Method
Impact Resilience - Blown Film (1.0 mil)
ft·lb/in
 Internal Method
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.984 mil, Blown Film)
 
 ASTM D2457
Haze (0.984 mil, Blown Film)
%
 ASTM D1003
Clarity - Blown Film (1.0 mil)
V
 Internal Method
Additional Information
Nominal Value
Unit
Test Method
Blocking - Blown Film (1.0 mil)
g
 Internal Method
Re-blocking - Blown Film (1.0 mil)
g
 Internal Method
Tear Strength 2
     ISO 6383-2
MD: 1.0 mil
lbf/in
  
TD: 1.0 mil
lbf/in
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 2102TN00W, SABIC LDPE 2102TN00W, SABIC® LDPE , SABIC LDPE, SABICLDPE2102TN00W, SABICLDPE, LDPE 2102 TN 00 W, LDPE2102TN00W, LDPE2102, LDPE, 2102 TN 00 W, 2102TN00W, 2102TN, TN00, 00W, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, TN2102, 2102LDPE
Features
Features may also be described by the following terms: Good Drawdown, Good draw down.
Notes
1Typical properties: these are not to be construed as specifications.
2Blown Film
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.