IDES Prospector Already have an account? Login Here

IDES

IsoFil® MG-2

Polyurethane (MDI)

Supplied by Pathway Polymers

The technical datasheet with complete property values for IsoFil® MG-2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
IsoFil® is a two-component system consisting of Catalyst blend (side A) and Prepolymer (side B). It is designed to be used where high level of mechanical properties of cured material is desired.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Appearance 
  • Brown
Forms 
  • Liquid
Elastomers
Nominal Value
Unit
 
Tensile Strength (Break)
psi
 
Tensile Elongation (Break)
%
 
Tear Strength
     
-- 2
lbf/in
 
Split
lbf/in
 
Bayshore Resilience
%
 
Hardness
Nominal Value
Unit
 
Durometer Hardness (Shore A)
 
 
Thermoset
Nominal Value
Unit
 
Shelf Life
wk
 
Thermoset Mix Viscosity
     
77°F 3
cP
 
77°F 4
cP
 
Gel Time
min
 
Fill Analysis
Nominal Value
Unit
 
Melt Density
     
77°F 3
g/cm³
 
77°F 4
g/cm³
 
Additional Information
Nominal Value
Unit
 
Cure Time (77°F)
day
 
Mixing Ratio
     
-- 5
 
 
-- 6
 
 
Processing Temperature 7
°F
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: IsoFil® MG-2, IsoFil MG2, IsoFil® , IsoFil, IsoFilMG2, MG, MG-2, MG2, MG:2, MG/2, MG+2, MG_2, MG 2, Polyurethane, Polyurethane (MDI), Polyurethane MDI, PUR-MDI, PURMDI, PUR:MDI, PUR/MDI, PUR+MDI, PUR_MDI, PUR MDI, PUR, Pathway Polymers, PolyurethaneMDI, 2MG
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
3Prepolymer (side B)
4Catalyst (side A)
5by weight (±5%)
6by volume (±5%)
7for both Catalyst (side A) & Prepolymer (side B)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.