IDES Prospector Already have an account? Login Here

IDES

FERREX® GPP35CF UL

Polypropylene

Calcium Carbonate Filler, 36%

Supplied by Ferro Corporation

The technical datasheet with complete property values for FERREX® GPP35CF UL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Calcium Carbonate Filler, 36% Filler by Weight
Features 
  • Good Processability
  • High Gloss
  • Homopolymer
  • Low Shrinkage
 
Uses 
  • Appliances
  • Electrical Housing
  • Housings
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Molding Shrinkage - Flow
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength (Yield)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
ASTM D256
Unnotched Izod Impact (73°F)
ft·lb/in
ASTM D256
Gardner Impact (0.125 in)
in·lb
ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
264 psi, Unannealed
°F
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FERREX® GPP35CF UL, FERREX GPP35CF UL, FERREX® , FERREX, FERREXGPP35CFUL, GPP 35 CF UL, GPP35CF UL, GPP35, 35CF, CFUL, GPP35CFUL, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Ferro, PolypropyleneUnspecified, PPUnspecified, 35GPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Gloss, Good Processability, Easy Processing, Low Shrinkage.
Uses
Uses may also be described by the following terms: Housings, Housing, Electrical Housings, Electrical Housing.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Mold Temperature
°F
 
Back Pressure
psi
 
Screw Speed
rpm
 
Clamp Tonnage
tons/in²
 
Screw L/D Ratio
 
 
Screw Compression Ratio
 
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.