IDES Prospector Already have an account? Login Here

IDES

Ultrason® P 3010 MR SW 10101

Polyphenylsulfone

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultrason® P 3010 MR SW 10101 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Unreinforced, higher viscosity injection moulding grade, flame retardant and with improved chemical resistance.This grade is black colored and demolding optimized. Abbreviated designation according to ISO 1043-1: PPSU.

Physical form and storage:
Ultrason® pellets are supplied in bags and/or octabins. The bulk density ranges between 700 and 800 g/l. Provided the packaging remains undamaged, Ultrason® can be stored indefinitely. Ultrason® pellets absorb moisture very rapidly. Therefore, the pellets need to be dried at least 4h at 130 °C to 150 °C in a vacuum or dry air drier prior to processing.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Mold Release
Features 
  • Flame Retardant
  • Good Chemical Resistance
  • Good Mold Release
  • High Viscosity
  
Agency Ratings 
RoHS Compliance 
Appearance 
  • Black
Processing Method 
  • Injection Molding
Part Marking Code 
  • PPSU
Resin ID (ISO 1043)
  • PPSU
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (360°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage 2
     ISO 294-4
Across Flow: 73°F
%
  
Flow: 73°F
%
  
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Viscosity Number 3
cm³/g
 ISO 307
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/50
Tensile Strain (Yield, 73°F)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Glass Transition Temperature (DSC) 4
°F
 ISO 11357-2
CLTE - Flow
      
73 to 176°F
in/in/°F
 ISO 11359-2
356°F
in/in/°F
 DIN 53752
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultrason® P 3010 MR SW 10101, Ultrason P 3010 MR SW 10101, Ultrason® P , Ultrason P, UltrasonP3010MRSW10101, UltrasonP, P 3010 MR SW 10101, P3010 MR SW 10101, P3010, P3010MRSW10101, 3010 MR SW 10101, 3010MR, MRSW, SW10101, 3010MRSW10101, Polyphenylsulfone, PPSU, Polysulfone, PSU, BASF, MR3010, 3010P
Features
Features may also be described by the following terms: High Viscosity, Good Chemical Resistance, Chemical Resistant, Good Mold Release, Easy Release, Good Demolding.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2ISO 2577
3in 0,01 g/ml Phenol/1,2, ortho-Dichlorbenzol, 1:1
410°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.