IDES Prospector Already have an account? Login Here

IDES

SABIC® LLDPE 6135NE

Linear Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LLDPE 6135NE is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® LLDPE 6135NE is a hexene linear low density polyethylene resin. Films made from this resin exhibit an outstanding balance between mechanical properties (like impact strength, tear strength and hottack) and optical properties on the one hand and stiffness on the other hand.

Typical applications for SABIC® LLDPE 6135NE are heavy duty bags, lamination films, agriculture films, frozen food packaging and other applications requiring a balance between high impact strength, tear resistance and stiffness. The grade is especially suited for multi layer recipes.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Good Stiffness
  • Good Tear Strength
  • Hexene Comonomer
  • High Impact Resistance
  • Opticals
Uses 
  • Agricultural Applications
  • Film
  • Food Packaging
  • Heavy-duty Bags
  • Laminates
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (Blown Film)
 
 ISO 8295
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Modulus
     ISO 527-3
MD: 2.0 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Stress
     ISO 527-3
MD: Yield, 2.0 mil, Blown Film
psi
  
TD: Yield, 2.0 mil, Blown Film
psi
  
MD: Break, 2.0 mil, Blown Film
psi
  
TD: Break, 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Impact
Nominal Value
Unit
Test Method
Impact Strength - Blown Film (2.0 mil)
ft·lb/in
 ASTM D4272
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature (DSC)
°F
 Internal Method
Additional Information
Nominal Value
Unit
Test Method
Blocking - Blown Film (2.0 mil)
g
 Internal Method
Puncture Resistance - Blown Film (2.0 mil)
ft·lb/in
 Internal Method
Tear Strength 2
     ISO 6383-2
MD: 2.0 mil
lbf/in
  
TD: 2.0 mil
lbf/in
  
Film of 50 µm and BUR = 2 has been produced on Kuhne BF line with an output of 35 kg/h. Die size 120 mm, die gap 2.7 mm.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LLDPE 6135NE, SABIC LLDPE 6135NE, SABIC® LLDPE , SABIC LLDPE, SABICLLDPE6135NE, SABICLLDPE, LLDPE 6135 NE, LLDPE6135NE, LLDPE6135, LLDPE, 6135 NE, 6135NE, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, SABIC, PolyethyleneLinearLowDensity, NE6135, 6135LLDPE
Features
Features may also be described by the following terms: Good Stiffness, Good Tear Strength, High Impact Resistance, Hexene Comonomer.
Uses
Uses may also be described by the following terms: Food Packaging, Heavy-duty Bags, Heavy Duty Bags.
Notes
1Typical properties: these are not to be construed as specifications.
2Blown Film
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.