IDES Prospector Already have an account? Login Here

IDES

SABIC® STAMAX 40YM243

Polypropylene

Long Glass Fiber, 40%

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® STAMAX 40YM243 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® STAMAX 40YM243 is a 40% long glass fiber reinforced UV stabilised grade. The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength.

The pellet size of SABIC® STAMAX 40YM243 is 12 mm.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Long Glass Fiber, 40% Filler by Weight
Additive 
  • UV Stabilizer
Features 
  • Chemically Coupled
  • High Stiffness
  • High Strength
Uses 
  • Automotive Applications
Automotive Specifications 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     ISO 527-2/1B
73°F, Injection Molded
psi
  
176°F, Injection Molded
psi
  
248°F, Injection Molded
psi
  
Tensile Stress
     ISO 527-2/1B
Yield, 73°F, Injection Molded
psi
  
Yield, 176°F, Injection Molded
psi
  
Yield, 248°F, Injection Molded
psi
  
Tensile Strain (Break, 73°F, Injection Molded)
%
 ISO 527-2/1B
Flexural Modulus
     ISO 178
73°F, Injection Molded
psi
  
176°F, Injection Molded
psi
  
Flexural Strength
     ISO 178
176°F
psi
  
73°F
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Falling Dart Impact - Total Energy (73°F)
ft·lb/in
 ISO 6603-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
CLTE - Flow
     ASTM D696
-22 to 86°F
in/in/°F
  
73 to 176°F
in/in/°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® STAMAX 40YM243, SABIC STAMAX 40YM243, SABIC® STAMAX , SABIC STAMAX, SABICSTAMAX40YM243, SABICSTAMAX, STAMAX 40 YM 243, STAMAX40YM243, STAMAX40, STAMAX, 40 YM 243, 40YM243, 40YM, YM243, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC, PolypropyleneUnspecified, PPUnspecified, YM40, 40STAMAX
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Strength, High Stiffness.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.