IDES Prospector Already have an account? Login Here

IDES

LG ASA LI933

Acrylonitrile Styrene Acrylate

Supplied by LG Chem Ltd.

The technical datasheet with complete property values for LG ASA LI933 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Description
Good Weatherability, Low Gloss

Application
Canopy, Siding, Fence, (Roofing) Tiles
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Features 
  • Good Weather Resistance
  • Low Gloss
  
Uses 
  • Outdoor Applications
Processing Method 
  • Coextrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (0.126 in)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2 (0.126 in)
psi
 ASTM D638
Tensile Strength 3 (Yield, 0.126 in)
psi
 ASTM D638
Tensile Elongation 3
     ASTM D638
Yield, 0.126 in
%
  
Break, 0.126 in
%
  
Flexural Modulus 4 (0.126 in)
psi
 ASTM D790
Flexural Strength 4 (Yield, 0.126 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F, 0.126 in
ft·lb/in
  
-22°F, 0.252 in
ft·lb/in
  
73°F, 0.126 in
ft·lb/in
  
73°F, 0.252 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.252 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 5
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0630 in
 
  
0.126 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: LG ASA LI933, LG ASA , LGASALI933, LGASA, ASALI 933, ASALI933, ASA, LI 933, LI933, Acrylonitrile Styrene Acrylate, LG Chem, AcrylonitrileStyreneAcrylate, 933LI, 933ASALI
Features
Features may also be described by the following terms: Low Gloss, Good Weather Resistance, Weather Resistant.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Top RollStack Temperature: 70 to 90°C
Middle RollStack Temperature: 70 to 90°C
Bottom RollStack Temperature: 70 to 100°C
Notes
1Typical properties: these are not to be construed as specifications.
20.039 in/min
32.0 in/min
40.59 in/min
5Rate A (50°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.