IDES Prospector Already have an account? Login Here

IDES

Keyflex® BT 5035D

Thermoplastic Copolyester Elastomer

Supplied by LG Chem Ltd.

The technical datasheet with complete property values for Keyflex® BT 5035D is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Description
Low Modulus, Black Color

Application
Automotive Body Plug, Fastener
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Uses 
  • Automotive Applications
  • Fasteners
  
Appearance 
  • Black
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (0.126 in, Injection Molded)
in/in
 ASTM D955
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break, 73°F, 0.0787 in, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Break, 73°F, 0.0787 in, Injection Molded)
%
 ASTM D638
Flexural Modulus 3 (73°F, 0.252 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-40°F, 0.252 in, Injection Molded
 
  
73°F, 0.252 in, Injection Molded
 
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A, 73°F, Injection Molded
 
  
Shore D, 73°F, Injection Molded
 
  
Thermal
Nominal Value
Unit
Test Method
Peak Melting Temperature
°F
 ASTM D3418
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index (Solution A)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Keyflex® BT 5035D, Keyflex BT 5035D, Keyflex® BT , Keyflex BT, KeyflexBT5035D, KeyflexBT, BT 5035 D, BT5035D, BT5035, BT, 5035 D, 5035D, Thermoplastic Copolyester Elastomer, TPC-ET, TPCET, TPC:ET, TPC/ET, TPC+ET, TPC_ET, TPC ET, Thermoplastic Elastomer, TPE, LG Chem, ThermoplasticCopolyesterElastomer, ThermoplasticElastomer, D5035, 5035BT
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.59 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.