IDES Prospector Already have an account? Login Here

IDES

Keyflex® BT HB9255D

Thermoplastic Copolyester Elastomer

Supplied by LG Chem Ltd.

The technical datasheet with complete property values for Keyflex® BT HB9255D is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Description
Medium Modulus, Black Color

Application
Air duct, Hose & Tubing
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Uses 
  • Hose
  • Tubing
  
Appearance 
  • Black
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break, 73°F, 0.0787 in, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Break, 73°F, 0.0787 in, Injection Molded)
%
 ASTM D638
Flexural Modulus 3 (73°F, 0.252 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-40°F, 0.252 in, Injection Molded
ft·lb/in
  
73°F, 0.252 in, Injection Molded
 
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, 73°F, Injection Molded)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, 0.252 in, Injection Molded)
°F
 ASTM D648
Peak Melting Temperature
°F
 ASTM D3418
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.252 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Keyflex® BT HB9255D, Keyflex BT HB9255D, Keyflex® BT , Keyflex BT, KeyflexBTHB9255D, KeyflexBT, BTHB 9255 D, BTHB9255D, BTHB9255, BT, HB 9255 D, HB9255D, HB9255, 9255D, Thermoplastic Copolyester Elastomer, TPC-ET, TPCET, TPC:ET, TPC/ET, TPC+ET, TPC_ET, TPC ET, Thermoplastic Elastomer, TPE, LG Chem, ThermoplasticCopolyesterElastomer, ThermoplasticElastomer, 9255HB, 9255BTHB
Uses
Uses may also be described by the following terms: Tubing, Tube.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.59 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.