IDES Prospector Already have an account? Login Here

IDES

Bionate® 65D

Polycarbonate + TPU

Supplied by DSM PTG

The technical datasheet with complete property values for Bionate® 65D is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Biocompatible
  • Good Abrasion Resistance
  • Good Flexibility
  • Good Strength
  • High ESCR (Stress Crack Resist.)
  • Opticals
  • Oxidation Resistant
Uses 
  • Medical/Healthcare Applications
Agency Ratings 
 
Appearance 
  • Clear Amber
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (224°C/1.2 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Ultimate
psi
  
50% Strain
psi
  
100% Strain
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bionate® 65D, Bionate 65D, Bionate® , Bionate, Bionate65D, 65 D, 65D, Polycarbonate + TPU, Polycarbonate TPU, Polycarbonate : TPU, Polycarbonate / TPU, Polycarbonate - TPU, Polycarbonate _ TPU, Polycarbonate TPU, PC+TPU, PCTPU, PC:TPU, PC/TPU, PC-TPU, PC_TPU, PC TPU, Polycarbonate, PC, DSM PTG, PolycarbonateTPU, Polycarbonate_TPU, D65
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant, Good Flexibility, Flexible, Good Strength, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Medical Applications.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): DMF (1), FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.