IDES Prospector Already have an account? Login Here

IDES

Kepital® F10-03H LOF

Acetal (POM) Copolymer

Supplied by KEP Americas

The technical datasheet with complete property values for Kepital® F10-03H LOF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Low emission, high viscosity grade with higher stiffness and strength than F10-02.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
  • South America
Features 
  • Copolymer
  • Good Thermal Stability
  • High Stiffness
  • High Viscosity
  • Low to No Odor
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
g/10 min
 ISO 1133
Molding Shrinkage - Flow (0.118 in)
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Break, 73°F)
psi
 ISO 527-2
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Kepital® F10-03H LOF, Kepital F1003H LOF, Kepital® , Kepital, KepitalF1003HLOF, F 10, F 10 03 H LOF, F10-03H LOF, F1003H LOF, F10:03H LOF, F10/03H LOF, F10+03H LOF, F10_03H LOF, F10 03H LOF, F10, 1003, 03H, HLOF, F1003HLOF, Acetal Copolymer, Acetal Copolymer, F10_03HLOF, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, KEP Americas, AcetalPOMCopolymer, 10F
Features
Features may also be described by the following terms: Low Odor, Good Thermal Stability, High Viscosity, High Stiffness.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.