IDES Prospector Already have an account? Login Here

IDES

Ultraform® N2720 M210 UNC Q600

Acetal (POM) Copolymer

Mineral Filler, 10%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultraform® N2720 M210 UNC Q600 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultraform N 2720 M210 UNC Q600 is a 10% mineral filled injection molding POM grade for low warpage parts with enhanced stiffness, strength and hardness.

Typical applications include chain links (chain conveyor), fan wheels and gasoline pump parts.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Filler / Reinforcement 
  • Mineral Filler, 10% Filler by Weight
Features 
  • Good Stiffness
  • High Hardness
  • High Strength
  • Low Warpage
  
Uses 
  • Conveyor Parts
  • Electrical Parts
  • Pump Parts
Agency Ratings 
Forms 
  • Granules
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/50
Tensile Strain (Yield, 73°F)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Melting Temperature (DSC)
°F
 ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultraform® N2720 M210 UNC Q600, Ultraform N2720 M210 UNC Q600, Ultraform® , Ultraform, UltraformN2720M210UNCQ600, N 2720 M 210 UNC Q 600, N2720 M210 UNC Q600, N2720, 2720M, M210, 210UNC, UNCQ, Q600, N2720M210UNCQ600, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, BASF, AcetalPOMCopolymer, 2720N
Features
Features may also be described by the following terms: Good Stiffness, High Strength, High Hardness, Hard, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Conveyor Parts, Conveyor Components.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.