Elastollan 1175A10W BASF TPU Thermoplastic Polyurethane Elastomer (Polyether)

Product Description

Elastollan® 1175A10W is a polyether-based thermoplastic polyurethane (TPU) containing a plasticizer. It contains a non-halogenated flame retardant and has a "V0" rating in accordance with the UL-94 vertical flame test (at thickness of 0.9mm or less). It exhibits excellent abrasion resistance, toughness, transparency, low temperature properties, hydrolytic stability, and fungus resistance. As with all TPU products, Elastollan® 1175A10W must be dried before processing. The drying step is required to maintain a low moisture content until the product enters the processing equipment. The water content must be less than 0.03% before and during processing. The typical drying conditions should be 2-4 hours @ 160°-180°F (70°-85°C). Elastollan® 1175A10W can be stored for up to 1 year in its original container. Containers should be stored in a cool and dry area.

General

Material Status

Commercial: Active

Availability

North America

Features

Flame Retardant

Fungus Resistant

Good Abrasion Resistance

Hydrolytically Stable

Low Temperature Toughness

Plasticized

Appearance

Clear/Transparent

Forms

Pellets

Processing Method

Extrusion

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus		psi	ASTM D790
Taber Abrasion Resistance (1000 g, H-18 Wheel)		mg	ASTM D1044
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412
100% Strain		psi
300% Strain		psi
Tensile Strength (Break)		psi	ASTM D412
Tensile Elongation (Break)		%	ASTM D412
Elongation Set After Break		%	ASTM D412
Tear Strength²		lbf/in	ASTM D624
Compression Set
73°F, 22.0 hr		%	ASTM D395
158°F, 22.0 hr		%	ASTM D395B
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature (DSC)		°F	DSC
Vicat Softening Temperature		°F	ASTM D1525
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0600 in
0.0360 in
Oxygen Index		%	ASTM D2863
Related Terminology
This supplier and product may also be known by these terms: Elastolan, Ellastolan Product names can be difficult to match. You may have searched any one of these terms to find this product: Elastollan® 1175A10W, Elastollan 1175A10W, Elastollan® , Elastollan, Elastollan1175A10W, 1175 A 10 W, 1175A10W, 1175A, A10, 10W, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyether), Thermoplastic Polyurethane Elastomer Polyether, TPU-Polyether, TPUPolyether, TPU:Polyether, TPU/Polyether, TPU+Polyether, TPU_Polyether, TPU Polyether, Thermoplastic Polyurethane, TPU, BASF TPU, ThermoplasticPolyurethaneElastomerPolyether, ThermoplasticPolyurethane, A1175
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant, Low Temperature Toughness.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Extrusion	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Die C

Elastollan® 1175A10W

Thermoplastic Polyurethane Elastomer (Polyether)

Supplied by BASF Corp. Thermoplastic Polyurethanes