IDES Prospector Already have an account? Login Here

IDES

Xtel® XE4300NA

Polyphenylene Sulfide Alloy

Supplied by Chevron Phillips Chemical Company LLC

The technical datasheet with complete property values for Xtel® XE4300NA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Xtel® XE4300NA is a high performance extrusion/blow-molding grade PPS based alloy developed to provide excellent mechanical strength, elongation and chemical resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Features 
  • Good Chemical Resistance
  • High Elongation
  • High Strength
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (316°C/5.0 kg)
g/10 min
 ASTM D1238
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
--
psi
 ASTM D638
--
psi
 ISO 527-2
Tensile Strength
      
Yield
psi
 ASTM D638
Yield
psi
 ISO 527-2
Tensile Elongation
      
Yield
%
 ASTM D638
Yield
%
 ISO 527-2
Flexural Modulus
      
--
psi
 ASTM D790
--
psi
 ISO 178
Flexural Strength
      
--
psi
 ASTM D790
--
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
0.125 in
ft·lb/in
 ASTM D256
--
ft·lb/in²
 ISO 180/A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
CLTE - Flow
     ASTM E831, ISO 11359-2
-58 to 122°F
in/in/°F
  
212 to 392°F
in/in/°F
  
Thermal Conductivity
Btu·in/hr/ft²/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant
     ASTM D150
77°F, 1 kHz
 
  
77°F, 1 MHz
 
  
Dissipation Factor
     ASTM D150
77°F, 1 kHz
 
  
77°F, 1 MHz
 
  
UL
Nominal Value
Unit
Test Method
Comparative Tracking Index (CTI) 2
V
 UL 746
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Xtel® XE4300NA, Xtel XE4300NA, Xtel® , Xtel, XtelXE4300NA, XE 4300 NA, XE4300NA, XE4300, 4300NA, Polyphenylene Sulfide Alloy, PPS Alloy, Polyphenylene Sulfide, PPS, CP Chem, PolyphenyleneSulfideAlloy, PPSAlloy, PolyphenyleneSulfide, 4300XE
Features
Features may also be described by the following terms: High Elongation, High Strength, Good Chemical Resistance, Chemical Resistant.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Injection values represent test specimen molding conditions.
Notes
1Typical properties: these are not to be construed as specifications.
2This product is not currently UL Listed; test results indicate this level of performance.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.