Hiprolon® 90 MC HLS G30 Suzhou Hipro Polymers Polyamide 612 (Glass Fabric Reinforcement, 30%)

Product Description

Hiprolon® 90 MC HLS G30 polyamide 6.12 compound reinforced with 30% chopped glass fiber for injection molding; features high dimension stability, chemical resistance, and impact resistance; widely used for auto parts, quick connector, housing et al;

General

Material Status

Commercial: Active

Availability

Asia Pacific

Filler / Reinforcement

Glass Fabric Reinforcement, 30% Filler by Weight

Features

Good Chemical Resistance

Good Dimensional Stability

High Impact Resistance

Uses

Automotive Applications

Connectors

Housings

Forms

Granules

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow		%
Flow		%
Water Absorption (Equilibrium, 73°F, 50% RH)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306
Melting Temperature		°F	ISO 11357-3
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	IEC 60093
Comparative Tracking Index		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
0.0630 in
0.126 in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Hiprolon® 90 MC HLS G30, Hiprolon 90 MC HLS G30, Hiprolon® , Hiprolon, Hiprolon90MCHLSG30, 90 MC HLS G 30, 90 MC HLS G30, 90MC, MCHLS, HLSG, G30, 90MCHLSG30, Polyamide 612, Nylon 612, Polyamide, Nylon, pa612, Suzhou Hipro Polymers, Polyamide612, Nylon612, MC90
Generic Name
Generic Name may also be described by the following terms: PA612, PA6/12.
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, High Impact Resistance, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Housings, Housing, Automotive Applications, Automotive Sector.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi

Notes

¹Typical properties: these are not to be construed as specifications.

Hiprolon® 90 MC HLS G30

Polyamide 612

Glass Fabric Reinforcement, 30%

Supplied by Suzhou Hipro Polymers Co., Ltd.