IDES Prospector Already have an account? Login Here

IDES

Hiprolon® 400 MC HLS G30

Polyamide

Glass Bead\Graphite, 30%

Supplied by Suzhou Hipro Polymers Co., Ltd.

The technical datasheet with complete property values for Hiprolon® 400 MC HLS G30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hiprolon® 400 MC HLS G30 specialty long chain polyamide compound reinforced with 30% chopped glass fiber for injection molding; features high dimension stability,impact resistance and chemical resistance, superior cold impact resistance.; Partly from bio-renewable resources; widely used for auto parts, electrical/machinery parts, thin-wall injection molding et al.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Bead\Graphite, 30% Filler by Weight
Features 
  • Good Chemical Resistance
  • Good Dimensional Stability
  • High Impact Resistance
  • Low Temperature Impact Resistance
  • Renewable Resource Content
Uses 
  • Automotive Applications
  • Electrical/Electronic Applications
  • Machinery Maintenance/Repair
  • Thin-walled Parts
  
Forms 
  • Granules
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
     ISO 294-4
Across Flow
%
  
Flow
%
  
Water Absorption (Equilibrium, 73°F, 50% RH)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2/1A
Tensile Strain (Break)
%
 ISO 527-2/1A
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306
Melting Temperature
°F
 ISO 11357-3
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Comparative Tracking Index
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flammability Classification
     IEC 60695-11-10, -20
0.0630 in
 
  
0.126 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Hiprolon® 400 MC HLS G30, Hiprolon 400 MC HLS G30, Hiprolon® , Hiprolon, Hiprolon400MCHLSG30, 400 MC HLS G 30, 400 MC HLS G30, 400MC, MCHLS, HLSG, G30, 400MCHLSG30, Polyamide, Unspecified, Polyamide Unspecified, Nylon, Unspecified, Nylon Unspecified, Polyamide, Nylon, Suzhou Hipro Polymers, PolyamideUnspecified, NylonUnspecified, MC400
Features
Features may also be described by the following terms: Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Dimensional Stability, Dimensionally Stable, High Impact Resistance, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Machinery Maintenance/Repair, Machinery Maintenance, Machinery Repair, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.