IDES Prospector Already have an account? Login Here

IDES

K-Resin® SBC KR52

Styrene Butadiene Block Copolymer

Supplied by Chevron Phillips Chemical Company LLC

The technical datasheet with complete property values for K-Resin® SBC KR52 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Excellent Printability
  • Good Stiffness
  • Opticals
Uses 
  • Film
  • Labels
  • Multilayer Film
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (vs. Itself - Dynamic)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Secant Modulus
     ASTM D882
1% Secant, MD
psi
  
1% Secant, TD
psi
  
Tensile Strength
     ASTM D882
MD: Yield
psi
  
TD: Yield
psi
  
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Elmendorf Tear Strength
     ASTM D1922
MD
g
  
TD
g
  
Oxygen Permeability
cm³·mil/100in²/atm/24 hr
 ASTM D3985
Water Vapor Transmission Rate
g·mil/100in²/atm/24 hr
 ASTM F1249
Impact
Nominal Value
Unit
Test Method
Instrumented Dart Impact
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Optical
Nominal Value
Unit
Test Method
Gardner Gloss
 
 ASTM D523
Haze
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: K-Resin® SBC KR52, KResin SBC KR52, K-Resin® SBC , KResin SBC, K:Resin® SBC, K/Resin® SBC, K+Resin® SBC, K_Resin® SBC, K Resin® SBC, KResinSBCKR52, KResinSBC, K_Resin SBC, K Resin SBC, SBCKR 52, K_ResinSBC, SBCKR52, SBC, KR 52, KR52, Styrene Butadiene Block Copolymer, Thermoplastic Elastomer, TPE, sb, CP Chem, StyreneButadieneBlockCopolymer, ThermoplasticElastomer, 52KR, 52SBCKR
Features
Features may also be described by the following terms: Excellent Printability, Printable, Good Stiffness.
Uses
Uses may also be described by the following terms: Multilayer Film, Multi-layer Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.