IDES Prospector Already have an account? Login Here

IDES

MarFlex® 5335

Low Density Polyethylene

Supplied by Chevron Phillips Chemical Company LLC

The technical datasheet with complete property values for MarFlex® 5335 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Antiblock (2750 ppm)
  • Slip (750 ppm)
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Dart Drop Impact (1.3 mil, Blown Film)
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD: 1.3 mil, Blown Film
g
  
TD: 1.3 mil, Blown Film
g
  
Oxygen Transmission Rate (1.3 mil, Blown Film)
cm³/100 in²/24 hr
 ASTM D3985
Water Vapor Transmission Rate (1.3 mil, Blown Film)
g/100 in²/24 hr
 ASTM F1249
Optical
Nominal Value
Unit
Test Method
Gloss (60°, 1.25 mil, Blown Film)
 
 ASTM D2457
Haze (1.25 mil, Blown Film)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: MarFlex® 5335, MarFlex 5335, MarFlex® , MarFlex, MarFlex5335, 5335, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, CP Chem, PolyethyleneLowDensity
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.