IDES Prospector Already have an account? Login Here

IDES

Marlex® 9505HF

High Density Polyethylene

Supplied by Chevron Phillips Chemical Company LLC

The technical datasheet with complete property values for Marlex® 9505HF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Antistatic
Features 
  • Antistatic
  • Durable
  • Good Impact Resistance
  • Hexene Comonomer
  • High ESCR (Stress Crack Resist.)
  • Recyclable Material
Uses 
  • Blow Molding Applications
  • Bottles
  • Containers
  • Industrial Applications
  
Agency Ratings 
 
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Compression Molded)
psi
 ASTM D638
Tensile Elongation 2 (Break, Compression Molded)
%
 ASTM D638
Flexural Modulus - Tangent 3 (Compression Molded)
psi
 ASTM D790
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marlex® 9505HF, Marlex 9505HF, Marlex® , Marlex, Marlex9505HF, 9505 HF, 9505HF, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, CP Chem, PolyethyleneHighDensity, HF9505
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Impact Resistance, Hexene Comonomer.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), ASTM (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 2.0 in/min
30.50 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.