IDES Prospector Already have an account? Login Here

IDES

Marlex® 9519H

High Density (HMW) Polyethylene

Supplied by Chevron Phillips Chemical Company LLC

The technical datasheet with complete property values for Marlex® 9519H is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Antistatic
Features 
  • Antistatic
  • Durable
  • Good Melt Strength
  • Good Stiffness
  • High ESCR (Stress Crack Resist.)
  • High Molecular Weight
  • Recyclable Material
Uses 
  • Blow Molding Applications
  • Containers
  • Household Goods
  • Industrial Containers
  
Agency Ratings 
  •  1
  
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3 (Yield, Compression Molded)
psi
 ASTM D638
Tensile Elongation 3 (Break, Compression Molded)
%
 ASTM D638
Flexural Modulus - Tangent 4 (Compression Molded)
psi
 ASTM D790
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marlex® 9519H, Marlex 9519H, Marlex® , Marlex, Marlex9519H, 9519 H, 9519H, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, PE, CP Chem, PolyethyleneHighDensityHMW, HDPEHMW, H9519
Features
Features may also be described by the following terms: Good Melt Strength, Good Stiffness, High Molecular Weight, High MW, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Industrial Containers, Industrial Containers, Household Goods, Housewares.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), ASTM (1).
Notes
1Foods of >pH5, Types I, IV-B, VI-B, VII-B and VIII, use conditions E through G per 21 CFR 176.170(c)
2Typical properties: these are not to be construed as specifications.
3Type IV, 2.0 in/min
40.50 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.