IDES Prospector Already have an account? Login Here

IDES

SABIC® HDPE F04660

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® HDPE F04660 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® HDPE F04660 is a homopolymer film grade with excellent processability and high stiffness. It has good moisture barrier properties and can be blended with LDPE and LLDPE to improve film strength and rigidity.

SABIC® HDPE F04660 is recommended for applications where high stiffness is required. It can be used in the middle layer in a coex structure or blended with LDPE and LLDPE to increase stiffness and mechanical properties. It has excellent water vapor barrier properties required for certain food packaging.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Processability
  • High Stiffness
  • Homopolymer
Uses 
  • Blending
  • Film
  • Food Packaging
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Elastic Modulus - MD (0.98 mil, Blown Film)
psi
 ASTM D882
Elastic Modulus - TD (0.98 mil, Blown Film)
psi
 ASTM D882
Tensile Strength
     ASTM D882
MD: Break, 0.98 mil, Blown Film
psi
  
TD: Break, 0.98 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 0.98 mil, Blown Film
%
  
TD: Break, 0.98 mil, Blown Film
%
  
Dart Drop Impact (0.98 mil, Blown Film)
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD: 0.98 mil, Blown Film
g
  
TD: 0.98 mil, Blown Film
g
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
Film properties have been measured on 25 µm blown film with a BUR of 4.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® HDPE F04660, SABIC HDPE F04660, SABIC® HDPE , SABIC HDPE, SABICHDPEF04660, SABICHDPE, HDPEF 04660, HDPEF04660, HDPE, F 04660, F04660, Polyethylene, High Density, Polyethylene High Density, Polyethylene, PE, SABIC, PolyethyleneHighDensity, 04660F, 04660HDPEF
Features
Features may also be described by the following terms: Good Processability, Easy Processing, High Stiffness.
Uses
Uses may also be described by the following terms: Food Packaging.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.