IDES Prospector Already have an account? Login Here

IDES

SABIC® PP 531Ph

Polypropylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® PP 531Ph is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® PP 531Ph has a high molecular weight and therefore mainly used for extrusion. It can be used for non-pressure pipes and sheet applications.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • High Molecular Weight
  • Homopolymer
  
Uses 
  • Piping
  • Sheet
  
Processing Method 
  • Extrusion
  • Pipe Extrusion
  • Sheet Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/5.0 kg
g/10 min
  
230°C/2.16 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
32°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
32°F
 
  
73°F
 
  
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/4A
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A
--
°F
 ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PP 531Ph, SABIC PP 531Ph, SABIC® PP , SABIC PP, SABICPP531Ph, SABICPP, PP 531 Ph, PP531Ph, PP531, PP, 531 Ph, 531Ph, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, SABIC, PolypropyleneUnspecified, PPUnspecified, Ph531, 531PP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Molecular Weight, High MW.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.