IDES Prospector Already have an account? Login Here

IDES

ICORENE® 3560

Linear Low Density Polyethylene

Supplied by ICO Europe

The technical datasheet with complete property values for ICORENE® 3560 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ICORENE® 3560 is a linear low density polyethylene specifically developed for rotational moulding.

ICORENE® 3560 is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • UV Stabilizer
Features 
  • Good Processability
  • Good Stiffness
  • Good Toughness
  • Good UV Resistance
  • High Flow
Uses 
  • Containers
  • General Purpose
  • Tanks
Appearance 
  • Natural Color
  • Unspecified Color
  
Forms 
  • Powder
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (122°F, 100% Igepal)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Drop Impact Resistance 2 (-4°F)
in·lb/mil
 Internal Method
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ICORENE® 3560, ICORENE 3560, ICORENE® , ICORENE, ICORENE3560, 3560, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, ICO Europe, PolyethyleneLinearLowDensity
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, High Flow, High Melt, High MFI, Good Stiffness, Good Toughness, Tough.
Notes
1Typical properties: these are not to be construed as specifications.
2Based on ISO 6603
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.