IDES Prospector Already have an account? Login Here

IDES

DOW™ Electrical & Telecommunications DGDL-3479 BK

Black High Density Polyethylene Compound for Cable Jacketing

Supplied by The Dow Chemical Company

The technical datasheet with complete property values for DOW™ Electrical & Telecommunications DGDL-3479 BK is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DGDL-3479 BK is a High Density Polyethylene compound produced from resin made by the UNIPOL™ process technology. DGDL-3479 BK is a prime quality telephone and power cable black jacketing that provides good toughness, excellent stress-cracking resistance, and abrasion resistance.

Specifications
DGDL-3479 BK meets the following raw material specifications:
  • ASTM D-1248: Type III, Class C, Category 5, Grades E10 and J4, J5

Cable jacketed with DGDL-3479 BK, using sound commercial extrusion practices, should meet the following specifications:
  • ICEA: S-61-402; NEMA WC5
  • ANSI: C8.35
  • IEC 60502
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Uses 
  • Cable Jacketing
  • Power Cable Jacketing
  • Wire & Cable Applications
Agency Ratings 
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, F0)
hr
 ASTM D1693
Carbon Black Content
%
 ASTM D1603
Absorption Coefficient - (kAB/m)
 
 ASTM D3349
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature 2
°F
 ASTM D746
Electrical
Nominal Value
Unit
Test Method
Dielectric Constant (1 MHz)
 
 ASTM D1531
Dissipation Factor (1 MHz)
 
 ASTM D1531
Additional Information
Nominal Value
Unit
Test Method
PENT
day
 ASTM F1473
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DOW™ Electrical & Telecommunications DGDL-3479 BK, DOW Electrical Telecommunications DGDL3479 BK, DOW™ Electrical & Telecommunications , DOW Electrical Telecommunications, DOWElectricalTelecommunicationsDGDL3479BK, DOWElectricalTelecommunications, DGDL, TelecommunicationsDGDL-3479 BK, TelecommunicationsDGDL3479 BK, TelecommunicationsDGDL:3479 BK, TelecommunicationsDGDL/3479 BK, TelecommunicationsDGDL+3479 BK, TelecommunicationsDGDL_3479 BK, TelecommunicationsDGDL 3479 BK, TelecommunicationsDGDL3479, TelecommunicationsDGDL, TelecommunicationsDGDL3479BK, DGDL-3479 BK, DGDL3479 BK, DGDL:3479 BK, DGDL/3479 BK, DGDL+3479 BK, DGDL_3479 BK, DGDL 3479 BK, DGDL3479, 3479BK, TelecommunicationsDGDL_3479BK, DGDL3479BK, DGDL_3479BK, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Dow, PolyethyleneHighDensity, 3479DGDL, 3479TelecommunicationsDGDL
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications.
Agency Ratings
This plastic material has 5 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ASTM (1), IEC (1), ICEA (1), NEMA (1), ANSI (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
DGDL-3479 BK processing guidelines include use of melt extrusion temperatures in the suggested range of 455 to 491°F (235-255°C). Hopper drying at 180°F (82°C) to remove moisture is recommended. However, specific recommendations for processing conditions can be determined only when the application and type of processing equipment are known.
Notes
1Typical properties: these are not to be construed as specifications.
2F50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.