Celanex® J600 Ticona Polybutylene Terephthalate (Glass\Mineral, 40%)

Product Description

Celanex J-600 is a 40% glass/mineral reinforced resin providing excellent warpage resistance, surface gloss and good mechanical properties. Celanex J-600 is particularly suited to applications requiring flatness and good surface appearance in large parts, such as exterior automotive components.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Filler / Reinforcement

Glass\Mineral, 40% Filler by Weight

Features

Good Surface Finish

High Gloss

Warp Resistant

Uses

Automotive Exterior Parts

RoHS Compliance

Automotive Specifications

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)		g/10 min	ASTM D1238
Melt Volume-Flow Rate (MVR) (265°C/2.16 kg)		in³/10min	ISO 1133
Molding Shrinkage
Flow		in/in	ASTM D955
Across Flow		%	ISO 294-4
Flow		%	ISO 294-4
Water Absorption
73°F, 24 hr		%	ASTM D570
Equilibrium, 73°F, 50% RH		%	ISO 62
Viscosity Number		cm³/g	ISO 307
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
73°F		psi	ASTM D638
--		psi	ISO 527-2/1A/1
Tensile Strength
Break, 73°F		psi	ASTM D638
Break		psi	ISO 527-2/1A/5
Tensile Elongation
Break, 73°F		%	ASTM D638
Break		%	ISO 527-2/1A/5
Flexural Modulus
73°F		psi	ASTM D790
73°F		psi	ISO 178
Flexural Strength
73°F		psi	ASTM D790
73°F		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact
73°F		ft·lb/in	ASTM D256
73°F		ft·lb/in²	ISO 180/1A
Unnotched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180/1U
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)			ISO 2039-2
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ASTM D648
264 psi, Unannealed		°F	ISO 75-2/A
1160 psi, Unannealed		°F	ISO 75-2/C
Vicat Softening Temperature		°F	ISO 306/B50
Melting Temperature²		°F	ISO 11357-3, ASTM D3418
CLTE			ISO 11359-2
Flow		in/in/°F
Transverse		in/in/°F
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	IEC 60093
Volume Resistivity
--		ohm·cm	ASTM D257
--		ohm·cm	IEC 60093
Dielectric Strength
--³		V/mil	ASTM D149
--		V/mil	IEC 60243-1
Dielectric Constant
1 MHz			ASTM D150
100 Hz			IEC 60250
1 MHz			IEC 60250
Dissipation Factor
1 MHz			ASTM D150
100 Hz			IEC 60250
1 MHz			IEC 60250
Arc Resistance		sec	ASTM D495
Comparative Tracking Index		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
--
0.0323 in
Oxygen Index		%	ISO 4589-2
Related Terminology
This supplier and product may also be known by these terms: Celenex Product names can be difficult to match. You may have searched any one of these terms to find this product: Celanex® J600, Celanex J600, Celanex® , Celanex, CelanexJ600, J 600, J600, Polybutylene Terephthalate, PBT, Polyester, Ticona, PolybutyleneTerephthalate, 600J
Features
Features may also be described by the following terms: High Gloss, Good Surface Finish, Warp Resistant, Warpage Resistant.
Automotive Specifications
This plastic material has approval for 11 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (4), CHRYSLER (2), GM (4), ASTM (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²10°C/min

³Method A (Short-Time)

Celanex® J600

Polybutylene Terephthalate

Glass\Mineral, 40%

Supplied by Ticona