IDES Prospector Already have an account? Login Here

IDES

Geon™ Vinyl Dry Blend E7804

Rigid Polyvinyl Chloride

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Geon™ Vinyl Dry Blend E7804 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Geon E7804 is designed for LIMITED out door exposure of less than several months, comparable to PVC pipe performance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Features 
  • Good Thermal Stability
  • Impact Modified
  
Uses 
  • Profiles
  • Telecommunications
  
Forms 
  • Powder
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     ASTM D638
14°F 2
psi
  
73°F 3
psi
  
Tensile Strength
     ASTM D638
Yield, 14°F 2
psi
  
Yield, 73°F 3
psi
  
Break, 14°F 2
psi
  
Break, 73°F 3
psi
  
Tensile Elongation
     ASTM D638
Yield, 14°F 2
%
  
Yield, 73°F 3
%
  
Break, 14°F 2
%
  
Break, 73°F 3
%
  
Flexural Modulus
     ASTM D790
14°F
psi
  
73°F
psi
  
Flexural Strength
     ASTM D790
14°F
psi
  
73°F
psi
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256A
14°F, 0.125 in, Compression Molded
ft·lb/in
  
73°F, 0.125 in, Compression Molded
ft·lb/in
  
Drop Impact Resistance
     ASTM D4226
73°F 4
in·lb/mil
  
73°F 5
in·lb/mil
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.125 in, Compression Molded
°F
  
264 psi, Unannealed, 0.125 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 6
CLTE - Flow
in/in/°F
 ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Geon™ Vinyl Dry Blend E7804, Geon Vinyl Dry Blend E7804, Geon™ Vinyl Dry Blend , Geon Vinyl Dry Blend, GeonVinylDryBlendE7804, GeonVinylDryBlend, BlendE 7804, BlendE7804, Blend, E 7804, E7804, Polyvinyl Chloride, Rigid, Polyvinyl Chloride Rigid, PVC, Rigid, PVC Rigid, Polyvinyl Chloride, PVC, PolyOne, PolyvinylChlorideRigid, PVCRigid, PolyvinylChloride, 7804E, 7804BlendE
Features
Features may also be described by the following terms: Good Thermal Stability.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
32.0 in/min
4Procedure A, C.125 Dart
5Procedure B, C.125 Dart
6Rate B (120°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.