IDES Prospector Already have an account? Login Here

IDES

Edgetek™ AM-35GF/000 FR NH

Polyphthalamide

Glass Fiber Reinforcement, 35%

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Edgetek™ AM-35GF/000 FR NH is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
The Edgetek® Engineering Thermoplastic Compounds portfolio covers a broad range of standard and custom-formulated high performance materials. This portfolio includes high-temperature materials for elevated service temperature environments, high-modulus / structural materials for load-bearing and high-strength applications and flame-retardant products. These compounds are based on select engineering thermoplastic resins that are compounded with reinforcing additives such as carbon fiber, glass fiber and glass beads.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 35% Filler by Weight
Features 
  • Flame Retardant
  • Halogen Free
 
Uses 
  • Automotive Applications
  • Electrical/Electronic Applications
  • General Purpose
  • Industrial Applications
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage
    ISO 294-4
Across Flow: 0.0787 in
%
 
Flow: 0.0787 in
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Annealed)
°F
ISO 75-2/A
Melting Temperature
°F
ISO 11357-3
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
    UL 94
0.0315 in
 
 
0.0630 in
 
 
0.118 in
 
 
Glow Wire Flammability Index
    IEC 60695-2-12
0.0315 in
°F
 
0.0630 in
°F
 
0.118 in
°F
 
Glow Wire Ignition Temperature
    IEC 60695-2-13
0.0315 in
°F
 
0.0630 in
°F
 
0.118 in
°F
 
Oxygen Index
%
ISO 4589-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Edgetek™ AM-35GF/000 FR NH, Edgetek AM35GF000 FR NH, Edgetek™ , Edgetek, EdgetekAM35GF000FRNH, AM, AM 35 GF 000 FR NH, AM-35GF/000 FR NH, AM35GF000 FR NH, AM-35GF:000 FR NH, AM-35GF+000 FR NH, AM-35GF-000 FR NH, AM-35GF_000 FR NH, AM-35GF 000 FR NH, AM:35GF/000 FR NH, AM/35GF/000 FR NH, AM+35GF/000 FR NH, AM_35GF/000 FR NH, AM 35GF/000 FR NH, AM35, 35GF, GF000, 000FR, FRNH, AM35GF000FRNH, AM35GF_000 FR NH, AM35GF 000 FR NH, AM_35GF000 FR NH, AM 35GF000 FR NH, AM35GF_000FRNH, AM_35GF000FRNH, Polyphthalamide, PPA, Polyamide, Nylon, PolyOne, 35AM
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.