Already have an account?
Login Here
IDES
Luran® 388 S
Styrene Acrylonitrile
Supplied by Styrolution
The technical datasheet with complete property values for Luran® 388 S is available to members of the
Prospector Plastics Database
.
Register to view full datasheet
.
Register to View Full Datasheet
General
Material Status
Commercial: Active
Availability
Asia Pacific
Europe
North America
Agency Ratings
RoHS Compliance
Forms
Pellets
Multi-Point Data
Creep Modulus vs. Time (ISO 11403-1)
Isochronous Stress vs. Strain (ISO 11403-1)
Isothermal Stress vs. Strain (ISO 11403-1)
Secant Modulus vs. Strain (ISO 11403-1)
Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR)
(220°C/10.0 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
(73°F)
psi
ISO 527-2
Tensile Stress
(Break, 73°F)
psi
ISO 527-2
Nominal Tensile Strain at Break
(73°F)
%
ISO 527-2
Tensile Creep Modulus
(1000 hr)
psi
ISO 899-1
Flexural Strength
(73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
(73°F)
ft·lb/in²
ISO 179
Charpy Unnotched Impact Strength
(73°F)
ft·lb/in²
ISO 179
Notched Izod Impact Strength
(73°F)
ft·lb/in²
ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
CLTE - Flow
in/in/°F
ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Dielectric Constant
IEC 60250
100 Hz
1 MHz
Dissipation Factor
IEC 60250
100 Hz
1 MHz
Electric Strength
2
(0.0591 in)
V/mil
IEC 60243-1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Luran® 388 S, Luran 388 S, Luran® , Luran, Luran388S, 388 S, 388S, Styrene Acrylonitrile, SAN, Styrolution, StyreneAcrylonitrile, S388
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1
Typical properties: these are not to be construed as specifications.
2
Short Time
Copyright © 2012
IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.