|
Specific Gravity
|
|
|
ASTM D792 |
|
Melt Mass-Flow Rate (MFR) (235°C/5.0 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Molding Shrinkage - Flow
|
|
in/in
|
ASTM D955 |
|
Tensile Modulus
|
|
psi
|
ASTM D638 |
|
Tensile Strength (Yield)
|
|
psi
|
ASTM D638 |
|
Tensile Elongation (Break)
|
|
%
|
ASTM D638 |
|
Flexural Modulus
|
|
psi
|
ASTM D790 |
|
Flexural Strength (Yield)
|
|
psi
|
ASTM D790 |
|
Notched Izod Impact
|
|
|
ASTM D256 |
|
-40°F, 0.125 in
|
|
ft·lb/in
|
|
|
-40°F, 0.250 in
|
|
ft·lb/in
|
|
|
73°F, 0.125 in
|
|
ft·lb/in
|
|
|
73°F, 0.250 in
|
|
ft·lb/in
|
|
|
Instrumented Dart Impact 2
|
|
|
ASTM D3763 |
|
-22°F, 0.100 in, Total Energy
|
|
in·lb
|
|
|
73°F, 0.100 in, Total Energy
|
|
in·lb
|
|
|
Rockwell Hardness (R-Scale)
|
|
|
ASTM D785 |
|
Deflection Temperature Under Load
|
|
|
ASTM D648 |
|
66 psi, Unannealed, 0.125 in
|
|
°F
|
|
|
264 psi, Unannealed, 0.125 in
|
|
°F
|
|
|
Vicat Softening Temperature
|
|
°F
|
ASTM D1525 3 |
|
CLTE - Flow
|
|
in/in/°F
|
ASTM D696 |
|
Flame Rating - UL
|
|
|
UL 94 |
|
0.0620 in
|
|
|
|
|
0.122 in
|
|
|
|
|
RTI Str (0.0620 in)
|
|
°F
|
UL 746 |
|
RTI Imp (0.0620 in)
|
|
°F
|
UL 746 |
|
RTI Elec (0.0620 in)
|
|
°F
|
UL 746 |
|
Gardner Gloss (60°)
|
|
|
ASTM D523 |
|
Spiral Flow Length, Bayer Test Method, 0.100 in. Thickness, 490°F Melt Temperature: 24 in
DTUL, ASTM D648, 264 psi @ 0.250 in thickness: 212°F
DTUL, ASTM D648, 66 psi @ 0.250 in thickness: 244°F
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayblend® 2153, Bayblend 2153, Bayblend® , Bayblend, Bayblend2153, 2153, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Bayer, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC
|
|
Features may also be described by the following terms: High Heat Resistance, Good Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, High Rigidity, Good Dimensional Stability, Dimensionally Stable, Good Processability, Easy Processing, Good Thermal Stability.
|
|
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Power Tools, Tools, Communication Applications, Communications, Automotive Applications, Automotive Sector, Business Equipment, Business Machines, Lawn and Garden Equipment, Lawn Equipment, Garden Equipment.
|
|
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3).
|