|
Specific Gravity
|
|
|
ASTM D792 |
|
Melt Mass-Flow Rate (MFR) (235°C/5.0 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Molding Shrinkage - Flow
|
|
in/in
|
ASTM D955 |
|
Tensile Modulus
|
|
psi
|
ASTM D638 |
|
Tensile Strength (Yield)
|
|
psi
|
ASTM D638 |
|
Tensile Elongation (Break)
|
|
%
|
ASTM D638 |
|
Flexural Modulus
|
|
psi
|
ASTM D790 |
|
Flexural Strength (Yield)
|
|
psi
|
ASTM D790 |
|
Notched Izod Impact
|
|
|
ASTM D256 |
|
-40°F, 0.125 in
|
|
ft·lb/in
|
|
|
-40°F, 0.250 in
|
|
ft·lb/in
|
|
|
73°F, 0.125 in
|
|
ft·lb/in
|
|
|
73°F, 0.250 in
|
|
ft·lb/in
|
|
|
Instrumented Dart Impact 2
|
|
|
ASTM D3763 |
|
-22°F, 0.100 in, Total Energy
|
|
in·lb
|
|
|
73°F, 0.100 in, Total Energy
|
|
in·lb
|
|
|
Rockwell Hardness (R-Scale)
|
|
|
ASTM D785 |
|
Deflection Temperature Under Load
|
|
|
ASTM D648 |
|
66 psi, Unannealed, 0.125 in
|
|
°F
|
|
|
264 psi, Unannealed, 0.125 in
|
|
°F
|
|
|
Vicat Softening Temperature
|
|
°F
|
ASTM D1525 3 |
|
CLTE - Flow
|
|
in/in/°F
|
ASTM D696 |
|
Flame Rating - UL
|
|
|
UL 94 |
|
0.0660 in
|
|
|
|
|
0.130 in
|
|
|
|
|
RTI Str (0.0620 in)
|
|
°F
|
UL 746 |
|
RTI Imp (0.0620 in)
|
|
°F
|
UL 746 |
|
RTI Elec (0.0620 in)
|
|
°F
|
UL 746 |
|
Gardner Gloss (60°)
|
|
|
ASTM D523 |
|
Spiral Flow Length, Bayer Test Method, 0.1 in Thickness, 490°F Melt Temperature: 20 in
DTUL @ 264 psi, ASTM D648, 0.25 in: 241°F
DTUL @ 66 psi, ASTM D648, 0.25 in: 268°F
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayblend® 2773, Bayblend 2773, Bayblend® , Bayblend, Bayblend2773, 2773, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Bayer, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC
|
|
Features may also be described by the following terms: High Heat Resistance, Good Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, High Rigidity, Good Dimensional Stability, Dimensionally Stable, Good Processability, Easy Processing, Good Thermal Stability, Good Color Stability.
|
|
Uses may also be described by the following terms: Business Equipment, Business Machines, Lawn and Garden Equipment, Lawn Equipment, Garden Equipment, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Medical Applications.
|
|
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3).
|