IDES Prospector Already have an account? Login Here

IDES

SABIC® LDPE 2022TN00

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LDPE 2022TN00 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® LDPE 2022TN00 is specially developed for applications that require a good balance between flow properties and mechanical properties, e.g. toys, household articles, clamping lids.

SABIC® LDPE 2022TN00 is not suitable for food applications. The alternative for food applications is SABIC® LDPE 1922T.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Flow
Uses 
  • Household Goods
  • Lids
  • Toys
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Melt Volume-Flow Rate (MVR)
     ISO 1133
190°C/2.16 kg
in³/10min
  
190°C/5.0 kg
in³/10min
  
Environmental Stress-Cracking Resistance 2 (140°F, 0.118 in, Rhodacal-DS10, Compression Molded)
hr
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, 0.0787 in, Compression Molded)
psi
 ISO 527-2/1BA/50
Tensile Stress
     ISO 527-2/1BA/50
Yield, 73°F, 0.0787 in, Compression Molded
psi
  
Break, 73°F, 0.0787 in, Compression Molded
psi
  
Tensile Strain (Break, 73°F, 0.0787 in, Compression Molded)
%
 ISO 527-2/1BA/50
Tensile Creep Modulus 3
     ISO 899-1
1 hr
psi
  
1000 hr
psi
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/A
-22°F, Compression Molded
ft·lb/in²
  
73°F, Compression Molded
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 73°F, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature (DSC)
°F
 DIN 53765
Enthalpy Change
J/g
 DIN 53765
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 2022TN00, SABIC LDPE 2022TN00, SABIC® LDPE , SABIC LDPE, SABICLDPE2022TN00, SABICLDPE, LDPE 2022 TN 00, LDPE2022TN00, LDPE2022, LDPE, 2022 TN 00, 2022TN00, 2022TN, TN00, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, TN2022, 2022LDPE
Features
Features may also be described by the following terms: Good Flow.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Notes
1Typical properties: these are not to be construed as specifications.
22 MPa
3thickness 4 mm, determined at 23 °C, 3 MPa
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.