IDES Prospector Already have an account? Login Here

IDES

SABIC® LLDPE 430BE

Linear Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LLDPE 430BE is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® LLDPE 430BE is a butene linear low density polyethylene resin. The material, natural resin, is designed for cast film applications, offering good mechanically properties, stiffness enhancement and furthermore enables to gain high line speeds.

SABIC® LLDPE 430BE is provided with a dedicated anti oxidant package suitable for cast film extrusion with low
gel levels.

SABIC® LLDPE 430BE is a very pure grade, with controlled low gel levels and provided with a dedicated antioxidant package suitable for cast film extrusion.

Skin layers for non-cling stretch cast film, Cast film side encapsulation, Mid layer Hygienic cast film and Product to realize downgauging by stiffness enhancement.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Butene Comonomer
  • Fast Molding Cycle
  • Good Processability
  • High Purity
  • High Stiffness
  • Low Gel
Uses 
  • Cast Film
  • Stretch Wrap
  
Appearance 
  • Natural Color
Processing Method 
  • Cast Film
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Elastic Recovery (0.8 mil)
%
 ASTM D5459
Protrusion Puncture Resistance 2 (0.8 mil)
in·lb
 ASTM D5748
Stress Retention (0.8 mil)
%
 ASTM D5459
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature (DSC)
°F
 Internal Method
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.787 mil, Cast Film)
 
 ASTM D2457
Haze (0.787 mil, Cast Film)
%
 ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Dart Impact (0.8 mil)
ft·lb/in
 ISO 7765-2
Tear Strength 2 (0.8 mil)
lbf/in
 ISO 6383-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LLDPE 430BE, SABIC LLDPE 430BE, SABIC® LLDPE , SABIC LLDPE, SABICLLDPE430BE, SABICLLDPE, LLDPE 430 BE, LLDPE430BE, LLDPE430, LLDPE, 430 BE, 430BE, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, SABIC, PolyethyleneLinearLowDensity, BE430, 430LLDPE
Features
Features may also be described by the following terms: High Stiffness, Good Processability, Easy Processing, Low Gel, High Purity, Butene Comonomer, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Uses
Uses may also be described by the following terms: Cast Film, Stretch Wrap.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Melt Temperature (Aim)
°F
  
Take-Off Roll
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Cast Film
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.