IDES Prospector Already have an account? Login Here

IDES

SABIC® HDPE ICP4907S

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® HDPE ICP4907S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® HDPE ICP4907S is part of SABIC's new breakthrough high density polyethylene Industrial Container Product portfolio. The grade meets latest market expectations regarding property balance and processing behaviour.

This unique SABIC grade is especially launched for state of the art blow moulding UN approved Intermediate Bulk Containers and Heating Oil Tanks, up to 1000 liters and more. This UV-stabilised and food approved grade combines an excellent processing performance with very good stress crack resistance, high stiffness and optimal impact, which offers potential system cost reduction.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • UV Stabilizer
Features 
  • Food Contact Acceptable
  • Good Crack Resistance
  • Good UV Resistance
  • High Impact Resistance
  • High Stiffness
Uses 
  • Industrial Containers
  • Non-specific Food Applications
  • Tanks
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, 0.0787 in, Compression Molded)
psi
 ISO 527-2/1BA/50
Tensile Stress
     ISO 527-2/1BA/50
Yield, 73°F, 0.0787 in, Compression Molded
psi
  
Break, 73°F, 0.0787 in, Compression Molded
psi
  
Tensile Strain (Break, 73°F, 0.0787 in, Compression Molded)
%
 ISO 527-2/1BA/50
ESCR (Strain Hardening) - Gp (73°F)
psi
 Internal Method
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (-22°F, Compression Molded)
ft·lb/in²
 ISO 180/A
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 73°F, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature (DSC)
°F
 DIN 53765
Enthalpy Change (73°F)
J/g
 DIN 53765
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® HDPE ICP4907S, SABIC HDPE ICP4907S, SABIC® HDPE , SABIC HDPE, SABICHDPEICP4907S, SABICHDPE, HDPEICP 4907 S, HDPEICP4907S, HDPEICP4907, HDPE, ICP 4907 S, ICP4907S, ICP4907, 4907S, Polyethylene, High Density, Polyethylene High Density, Polyethylene, PE, SABIC, PolyethyleneHighDensity, 4907ICP, 4907HDPEICP
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Crack Resistance, Crack Resistant, High Impact Resistance, High Stiffness.
Uses
Uses may also be described by the following terms: Food Applications, Industrial Containers, Industrial Containers.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.