IDES Prospector Already have an account? Login Here

IDES

SABIC® STAMAX 30YM241

Polypropylene

Long Glass Fiber, 30%

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® STAMAX 30YM241 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® STAMAX 30YM241 is a high heat 30% long glass fiber reinforced grade. The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength.

The pellet size of SABIC® STAMAX 30YM241 is 12 mm.

IMDS ID: 127597533
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Long Glass Fiber, 30% Filler by Weight
Features 
  • Chemically Coupled
  • High Heat Resistance
  • High Stiffness
  • High Strength
  
Uses 
  • Automotive Applications
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     ISO 527-2/1B
73°F, Injection Molded
psi
  
176°F, Injection Molded
psi
  
248°F, Injection Molded
psi
  
Tensile Stress
     ISO 527-2/1B
Break, 73°F, Injection Molded
psi
  
Break, 176°F, Injection Molded
psi
  
Break, 248°F, Injection Molded
psi
  
Tensile Strain (Break, 73°F, Injection Molded)
%
 ISO 527-2/1B
Flexural Modulus
     ISO 178
73°F, Injection Molded
psi
  
176°F, Injection Molded
psi
  
Flexural Strength
     ISO 178
176°F, Injection Molded
psi
  
73°F, Injection Molded
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Multi-Axial Instrumented Impact Energy (73°F, Injection Molded)
ft·lb
 ISO 6603-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
CLTE - Flow
     ASTM D696
-22 to 86°F
in/in/°F
  
73 to 176°F
in/in/°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® STAMAX 30YM241, SABIC STAMAX 30YM241, SABIC® STAMAX , SABIC STAMAX, SABICSTAMAX30YM241, SABICSTAMAX, STAMAX 30 YM 241, STAMAX30YM241, STAMAX30, STAMAX, 30 YM 241, 30YM241, 30YM, YM241, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC, PolypropyleneUnspecified, PPUnspecified, YM30, 30STAMAX
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Stiffness, High Heat Resistance, High Strength.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.