LNP* Lubricomp* CL002 SABIC IP Euro Polystyrene, High Impact

Product Description
LNP* LUBRICOMP* CL002 is a compound based on Polystyrene resin containing PTFE. Added features include: Internally Lubricated.
General
Material Status	Commercial: Active
Availability	Europe
Additive	PTFE Lubricant
Features	Lubricated
RoHS Compliance
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage - Flow		in/in	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress (Break)		psi	ISO 527-2/5
Tensile Strain (Break)		%	ISO 527-2/5
Flexural Modulus²		psi	ISO 178
Flexural Strength^2, 3		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength⁴ (73°F)		ft·lb/in²	ISO 180/1A
Unnotched Izod Impact Strength⁴ (73°F)		ft·lb/in²	ISO 180/1U
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature⁵
66 psi, Unannealed, 2.52 in Span		°F	ISO 75-2/Bf
264 psi, Unannealed, 2.52 in Span		°F	ISO 75-2/Af
CLTE			ISO 11359-2
Flow: 73 to 140°F		in/in/°F
Transverse: 73 to 140°F		in/in/°F
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Lubricomp* CL002, LNP Lubricomp CL002, LNP* Lubricomp* , LNP Lubricomp, LNPLubricompCL002, LNPLubricomp, CL 002, CL002, PS, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, SABIC IP Euro, PolystyreneHighImpact, PSHIPS, 002CL

Notes

¹Typical properties: these are not to be construed as specifications.

²0.079 in/min

³Break

⁴80*10*4

⁵80*10*4 mm

LNP* Lubricomp* CL002