IDES Prospector Already have an account? Login Here

IDES

Tarnamid® T- 27 GF10 MX6

Polyamide 6

Glass Fiber Reinforcement, 10%; Mineral Filler, 30%

Supplied by Zaktady Azotowe w Tarnowie-Moscicach S.A.

The technical datasheet with complete property values for Tarnamid® T- 27 GF10 MX6 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
It is polyamide 6 containing 10% glass fibre and 30% mineral reinforced, release agent and stabilisation's system, flame retardant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
  • Mineral Filler, 30% Filler by Weight
  
Additive 
  • Flame Retardant
  • Mold Release
  • Processing Stabilizer
Features 
  • Flame Retardant
Uses 
  • Appliances
  • Automotive Applications
  • Electrical/Electronic Applications
  • Household Goods
  
Appearance 
  • Black
  • Colors Available
  • Natural Color
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (275°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     ISO 294-4
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Melting Temperature
°F
 ISO 11357-3
Limit of Temperature - a few hours operation
°F
  
Temperature Index
      
20000 hr
°F
  
5000 hr
°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant (1 Hz)
 
 IEC 60250
Dissipation Factor (1 Hz)
 
 IEC 60250
Comparative Tracking Index (Solution A)
V
 IEC 60112
Electric Strength (0.0787 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
 UL 94
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Burning Rate
 
 FMVSS 302
Additional Information
Nominal Value
Unit
Test Method
ISO Type
 
 ISO 1874
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tarnamid® T- 27 GF10 MX6, Tarnamid T 27 GF10 MX6, Tarnamid® , Tarnamid, TarnamidT27GF10MX6, T 27 GF 10 MX 6, T- 27 GF10 MX6, T 27 GF10 MX6, T: 27 GF10 MX6, T/ 27 GF10 MX6, T+ 27 GF10 MX6, T_ 27 GF10 MX6, T 27 GF10 MX6, T27, 27GF, GF10, 10MX, MX6, T27GF10MX6, T_27GF10MX6, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Zaktady Azotowe, Polyamide6, Nylon6, 27T
Generic Name
Generic Name may also be described by the following terms: PA6.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Suggested Max Moisture
%
  
Suggested Max Regrind
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.