IDES Prospector Already have an account? Login Here

IDES

EMERGE™ PC 4701-15

Advanced Resin

Glass Fiber Reinforcement, 10%

Supplied by Styron LLC

The technical datasheet with complete property values for EMERGE™ PC 4701-15 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMERGE™ PC 4701-15 Advanced resin is formulated with 10% glass fiber and proprietary flame retardant package. It provides superb ignition resistance, rigidity, dimension stability and heat resistance. EMERGE PC 4701-15 is designed for power tools, electrical appliances and electronics parts.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Additive 
  • Flame Retardant
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.126 in, Injection Molded)
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield, 0.126 in, Injection Molded
psi
  
Break, 0.126 in, Injection Molded
psi
  
Tensile Elongation (Break, 0.126 in, Injection Molded)
%
 ASTM D638
Flexural Modulus (0.126 in, Injection Molded)
psi
 ASTM D790
Flexural Strength (0.126 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F, 0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Tensile Impact Strength 2 (73°F, 0.126 in, Injection Molded)
ft·lb/in²
 ASTM D1822
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, 0.126 in, Injection Molded)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Annealed
°F
  
264 psi, Unannealed
°F
  
264 psi, Annealed
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 3
Ball Indentation Temperature
°F
 IEC 60335-1
CLTE - Flow (-40 to 180°F)
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 4
     UL 94
0.0630 in
 
  
0.126 in
 
  
Oxygen Index 4
%
 ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EMERGE™ PC 4701-15, EMERGE PC 470115, EMERGE™ , EMERGE, EMERGEPC470115, PC 4701, PC 4701-15, PC 470115, PC 4701:15, PC 4701/15, PC 4701+15, PC 4701_15, PC 4701 15, PC4701, 470115, PC470115, PC4701_15, Polycarbonate, PC, Styron, 4701PC
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type S
3Rate A (50°C/h), Loading 2 (50 N)
4This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.