IDES Prospector Already have an account? Login Here

IDES

MonoSol® M2000

Polyvinyl Alcohol

Supplied by MonoSol, LLC

The technical datasheet with complete property values for MonoSol® M2000 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
MonoSol M2000 is a PVOH based thermoplastic film, soluble in hot water and manufactured using MonoSol's proprietary solution cast technology.

MonoSol M2000 is a hot water-soluble general purpose PVOH film. With high stiffness and strength, M2000 performs well in continuous molding operations. The maximum use temperature is 275 F (135 C). Standard thickness is 38 micron (1.5 mil).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Biodegradable
  • High Stiffness
  • High Strength
  • Water Soluble
  
Uses 
  • Film
  • General Purpose
  
Forms 
  • Film
Physical
Nominal Value
Unit
Test Method
Moisture Content 2 (73°F, 1.5 mil)
wt%
  
Solubility 3
      
Disintegration: 140°F
sec
  
Dissolution: 140°F
sec
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Thickness - Recommended / Available
 
  
Tensile Strength - MD
      
Yield, 1.5 mil
psi
 ASTM D882
Yield, 1.5 mil
psi
 ISO 527-3
Tensile Elongation - MD (Yield, 1.5 mil)
%
 ASTM D882, ISO 527-3
Yield (73°F, 1.5 mil)
psi
 ASTM D4321
Thermal
Nominal Value
Unit
Test Method
Max. Continuous Use Temperature
°F
  
Related Terminology
This supplier and product may also be known by these terms: Mono-Sol

Product names can be difficult to match. You may have searched any one of these terms to find this product: MonoSol® M2000, MonoSol M2000, MonoSol® , MonoSol, MonoSolM2000, M 2000, M2000, Polyvinyl Alcohol, PVOH, Vinyl Alcohol, VOH, PolyvinylAlcohol, VinylAlcohol, 2000M
Features
Features may also be described by the following terms: High Stiffness, High Strength.
Notes
1Typical properties: these are not to be construed as specifications.
250% RH
3Distilled Water (MSTM 205)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.