Hostalen ACP 5331 H LyondellBasell Polyethylene, High Density

Product Description

Hostalen ACP 5331 H is a state of the art HDPE resin, produced by latest Hostalen ACP technology.

Hostalen ACP 5331 H is easy processable on injection moulding and compression moulding equipment.

Exceptional organoleptic properties and a good balance of stiffness, toughness and ESCR makes Hostalen ACP 5331 H suitable for production of closures for water, CSD and other type of food and non food caps and closures as well as tube shoulders.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Features

Food Contact Acceptable

Good Organoleptic Properties

Good Processability

Good Stiffness

Good Toughness

High ESCR (Stress Crack Resist.)

Uses

Bottles

Caps

Closures

Tubing

Appearance

Colors Available

Forms

Pellets

Processing Method

Compression Molding

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/2.16 kg		g/10 min
190°C/5.0 kg		g/10 min
FNCT² (122°F)		hr	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Yield)		%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (-22°F)		ft·lb/in²	ISO 179
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Ball Indentation Hardness (H 132/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/B50
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostalen ACP 5331 H, Hostalen , HostalenACP5331H, ACP 5331 H, ACP5331, 5331H, ACP5331H, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, LyondellBasell, PolyethyleneHighDensity, 5331ACP
Features
Features may also be described by the following terms: Good Processability, Easy Processing, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Organoleptic Properties, Good Stiffness, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Tubing, Tube.

Notes

¹Typical properties: these are not to be construed as specifications.

²6 MPa, 2% Arkopal

Hostalen ACP 5331 H

High Density Polyethylene

Supplied by LyondellBasell Industries