IDES Prospector Already have an account? Login Here

IDES

Quattor® HS-5502

High Density Polyethylene

Supplied by Quattor Petroquímica

The technical datasheet with complete property values for Quattor® HS-5502 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
QUATTOR® HS-5502 is a high density polyethylene, hexene copolymer, produced through "Loop Slurry" process, suitable for blow molding of lightweight bottles and containers. QUATTOR ® HS-5502 offers exceptional processability and bottles produced have excellent stiffness.

PROCESSES AND TYPICAL APPLICATION
Typical blow molded applications include food packing, pharmaceuticals, household and industrial chemical containers.

Recommended processing conditions: temperature profile 185°C (feeding zone); 190°C (barrel) and 195°C (die); parison temperature: 200°C, mold temperature range: 5 to 25°C.

Additives: Antioxidant.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
  • South America
 
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Food Contact Acceptable
  • Good Processability
  • Hexene Comonomer
  • High Stiffness
Uses 
  • Containers
  • Food Packaging
  • Industrial Containers
  • Pharmaceuticals
 
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Environmental Stress-Cracking Resistance (122°F, 100% Igepal, F50)
hr
ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quattor® HS-5502, Quattor HS5502, Quattor® , Quattor, QuattorHS5502, HS, HS-5502, HS5502, HS:5502, HS/5502, HS+5502, HS_5502, HS 5502, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Quattor Petroquimica, PolyethyleneHighDensity, 5502HS
Features
Features may also be described by the following terms: Hexene Comonomer, Good Processability, Easy Processing, High Stiffness.
Uses
Uses may also be described by the following terms: Food Packaging, Industrial Containers, Industrial Containers.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Die Temperature
°F
 
Extrusion Notes
Parison temperature: 200°C
Mold temperature range: 5 to 25°C
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.