IDES Prospector Already have an account? Login Here

IDES

InnoPlus LL7410D

Linear Low Density Polyethylene

Supplied by PTT Chemical Public Company Limited

The technical datasheet with complete property values for InnoPlus LL7410D is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
InnoPlus LL7410D resin is a linear low density polyethylene with butene comonomers. There are slip and antiblock added. This grade offer the excellent machinability on conversion lines. Film extruded from InnoPlus LL7410D have high tensile strength, elongation, good toughness and outstanding puncture strength. It is available for tubular blown film processing.

InnoPlus LL7410D is recommended for producing the general purpose film, liner, food packaging, heavy duty and agricultural film.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Antiblock
  • Slip
  
Features 
  • Antiblocking
  • Butene Comonomer
  • Good Toughness
  • High Elongation
  • High Tensile Strength
  • Machinable
  • Puncture Resistant
  • Slip
Uses 
  • Agricultural Applications
  • Blending
  • Film
  • Food Packaging
  • Liners
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield, Compression Molded
psi
  
Break, Compression Molded
psi
  
Tensile Elongation (Break, Compression Molded)
%
 ASTM D638
Flexural Modulus (Compression Molded)
psi
 ISO 178
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
1% Secant, MD: 0.98 mil, Blown Film
psi
  
1% Secant, TD: 0.98 mil, Blown Film
psi
  
Tensile Strength
     ASTM D882
MD: Break, 0.98 mil, Blown Film
psi
  
TD: Break, 0.98 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 0.98 mil, Blown Film
%
  
TD: Break, 0.98 mil, Blown Film
%
  
Dart Drop Impact (0.98 mil, Blown Film)
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD: 0.98 mil, Blown Film
g
  
TD: 0.98 mil, Blown Film
g
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (Compression Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, Compression Molded)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
 ASTM D2117
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 0.984 mil, Blown Film)
 
 ASTM D2457
Haze (0.984 mil, Blown Film)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: InnoPlus LL7410D, InnoPlus , InnoPlusLL7410D, LL 7410 D, LL7410D, LL7410, 7410D, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, PTT Chemical, PolyethyleneLinearLowDensity, 7410LL
Features
Features may also be described by the following terms: Butene Comonomer, Slip, Unspecified Slip, Antiblocking, Unspecified Antiblock, High Tensile Strength, High Elongation, Good Toughness, Tough, Good Puncture Resistance, Puncture Resistant.
Uses
Uses may also be described by the following terms: Food Packaging.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.