IDES Prospector Already have an account? Login Here

IDES

Terlux® 2812 HD

Methyl Methacrylate / ABS

Supplied by Styrolution

The technical datasheet with complete property values for Terlux® 2812 HD is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Terlux 2812 HD is a suitable grade for the food packaging and health care and diagnostic markets.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Uses 
  • Food Packaging
  • Medical/Healthcare Applications
  
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow
%
 ISO 294-4
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Yield, 73°F)
%
 ISO 527-2
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
CLTE - Flow
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Electric Strength
V/mil
 IEC 60243-1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Terlux® 2812 HD, Terlux 2812 HD, Terlux® , Terlux, Terlux2812HD, 2812 HD, 2812HD, Methyl Methacrylate / ABS, Methyl Methacrylate ABS, Methyl Methacrylate : ABS, Methyl Methacrylate + ABS, Methyl Methacrylate - ABS, Methyl Methacrylate _ ABS, Methyl Methacrylate ABS, MABS, Methyl Methacrylate, MM, Styrolution, MethylMethacrylateABS, MethylMethacrylate, MethylMethacrylate_ABS, HD2812
Uses
Uses may also be described by the following terms: Food Packaging, Medical Applications.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.