IDES Prospector Already have an account? Login Here

IDES

Tarnoform® 200 AR

Acetal (POM) Copolymer

Aramid Fiber

Supplied by Zaktady Azotowe w Tarnowie-Moscicach S.A.

The technical datasheet with complete property values for Tarnoform® 200 AR is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Tarnoform® 200 AR there is high viscosity acetal copolymer resin modified with aramide resin.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Aramid Fiber
Features 
  • Good Wear Resistance
  • High Viscosity
  
Appearance 
  • Black
  • Colors Available
  • Natural Color
  • Yellow
  
Forms 
  • Granules
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow (0.0787 in)
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Melting Temperature
°F
 ISO 11357-3
Limit of Temperature - a few hours operation
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
 UL 94
Burning Rate
in/min
 FMVSS 302
Additional Information
Nominal Value
Unit
Test Method
ISO Type
 
 ISO 1874
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tarnoform® 200 AR, Tarnoform 200 AR, Tarnoform® , Tarnoform, Tarnoform200AR, 200 AR, 200AR, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, Zaktady Azotowe, AcetalPOMCopolymer, AR200
Features
Features may also be described by the following terms: High Viscosity, Good Wear Resistance, Wear Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Suggested Max Regrind
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.