IDES Prospector Already have an account? Login Here

IDES

Ultrason® S 3010 MR UN

Polysulfone

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultrason® S 3010 MR UN is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Unreinforced, higher viscosity injection moulding and extrusion grade, tougher, with improved chemical resistance and demolding optimized.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Chemical Resistance
  • Good Mold Release
  • High Viscosity
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Resin ID (ISO 1043)
  • PSU
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (360°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     ISO 294-4
Across Flow
%
  
Flow
%
  
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Viscosity Number
cm³/g
 ISO 307
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/50
Tensile Strain (Yield, 73°F)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/A
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Glass Transition Temperature
°F
 ISO 11357-2
CLTE
      
Flow: 73 to 176°F
in/in/°F
 ISO 11359-2
Transverse: 284°F
in/in/°F
 DIN 53752
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultrason® S 3010 MR UN, Ultrason S 3010 MR UN, Ultrason® S , Ultrason S, UltrasonS3010MRUN, UltrasonS, S 3010 MR UN, S3010 MR UN, S3010, S3010MRUN, 3010 MR UN, 3010MR, MRUN, 3010MRUN, Polysulfone, PSU, BASF, MR3010, 3010S
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, High Viscosity, Good Mold Release, Easy Release, Good Demolding.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.