Ultramid B 27 E 01 BASF Polyamide 6

Product Description

Ultramid B27 E 01 is a low viscosity general-purpose, extrusion PA6 grade well suited for compounding. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other countries will be provided on request.

General

Material Status

Commercial: Active

Availability

Europe

North America

Features

Low Viscosity

Oil Resistant

Uses

Compounding

Monofilaments

Paper Coatings

Agency Ratings

RoHS Compliance

Appearance

Natural Color

Forms

Pellets

Processing Method

Extrusion

Injection Molding

Multi-Point Data

Creep Modulus vs. Time (ISO 11403-1)

Isochronous Stress vs. Strain (ISO 11403-1)

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Shear Modulus vs. Temperature (ISO 11403-1)

Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Dry	Conditioned	Unit	Test Method
Density		--	lb/in³	ISO 1183²
Melt volume-flow rate (275°C/5.0 kg)		--	in³/10min	ISO 1133²
Water Absorption				ISO 62²
Saturation		--	%
Equilibrium		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus			psi	ISO 527-2²
Tensile Stress (Yield)			psi	ISO 527-2²
Tensile Strain (Yield)			%	ISO 527-2²
Nominal strain at break			%	ISO 527-2²
Impact	Dry	Conditioned	Unit	Test Method
Charpy notched impact strength (73°F)			ft·lb/in²	ISO 179/1eA²
Charpy impact strength				ISO 179/1eU²
-22°F		--
73°F
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load (264 psi)		--	°F	ISO 75-2²
Melting Temperature (DSC)		--	°F	ISO 3146
CLTE - Flow		--	in/in/°F	ISO 11359-2²
Electrical	Dry	Conditioned	Unit	Test Method
Volume resistivity			ohm·in	IEC 60093²
Relative Permittivity				IEC 60250²
100 Hz		--
1 MHz
Dissipation Factor				IEC 60250²
100 Hz		--
1 MHz
Comparative tracking index				IEC 60112²
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® B 27 E 01, Ultramid B 27 E 01, Ultramid® B , Ultramid B, UltramidB27E01, UltramidB, B 27 E 01, B27 E 01, B27, B27E01, 27 E 01, 27E, E01, 27E01, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, E27, 27B
Generic Name
Dry	Generic Name may also be described by the following terms: PA6.
Conditioned	Generic Name may also be described by the following terms: PA6.
Features
Dry	Features may also be described by the following terms: Low Viscosity.
Uses
Dry	Uses may also be described by the following terms: Monofilaments, Monofilament, Compounding, Compounds, Paper Coatings, Paper Coating.
Agency Ratings
Dry	This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® B 27 E 01, Ultramid B 27 E 01, Ultramid® B , Ultramid B, UltramidB27E01, UltramidB, B 27 E 01, B27 E 01, B27, B27E01, 27 E 01, 27E, E01, 27E01, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, E27, 27B

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Rate

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Ultramid® B 27 E 01

Polyamide 6

Supplied by BASF Corporation