|
Density
|
|
g/cm³
|
ASTM D1505 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Coefficient of Friction (Cast Film)
|
|
|
ASTM D1894 |
|
Film Thickness - Tested
|
|
mil
|
|
|
Tensile Strength
|
|
|
ASTM D882 |
|
MD: Break, 1.2 mil, Blown Film
|
|
psi
|
|
|
TD: Break, 1.2 mil, Blown Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ASTM D882 |
|
MD: Break, 1.2 mil, Blown Film
|
|
%
|
|
|
TD: Break, 1.2 mil, Blown Film
|
|
%
|
|
|
Dart Drop Impact (1.2 mil, Blown Film)
|
|
g
|
ASTM D1709 |
|
Elmendorf Tear Strength 2
|
|
|
ASTM D1922 |
|
MD: 1.2 mil
|
|
lbf/in
|
|
|
TD: 1.2 mil
|
|
lbf/in
|
|
|
Brittleness Temperature
|
|
°F
|
ASTM D746 |
|
Vicat Softening Temperature
|
|
°F
|
ASTM D1525 |
|
Gloss (45°, 1.18 mil, Blown Film)
|
|
|
ASTM D2457 |
|
Clarity (1.18 mil, Blown Film)
|
|
|
ASTM D1746 |
|
Haze (1.18 mil, Blown Film)
|
|
%
|
ASTM D1003 |
|
Blocking
|
|
g/100 cm²
|
ASTM D3354 |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Asrene® UF 1810S1, Asrene UF 1810S1, Asrene® , Asrene, AsreneUF1810S1, UF 1810 S 1, UF 1810S1, UF1810, 1810S, S1, UF1810S1, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Chandra Asri, PolyethyleneLinearLowDensity, 1810UF
|
|
Features may also be described by the following terms: High Antiblocking, High Antiblock, Butene Comonomer, Good Processability, Easy Processing, High Slip, Good Impact Resistance.
|