IDES Prospector Already have an account? Login Here

IDES

Asrene® UB 5206H

High Density Polyethylene

Supplied by Chandra Asri Petrochemical

The technical datasheet with complete property values for Asrene® UB 5206H is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Good Impact Resistance
  • Good Stiffness
  • Hexene Comonomer
  • High ESCR (Stress Crack Resist.)
  
Uses 
  • Blow Molding Applications
  • Conduit
  • Containers
  • Drums
  • Industrial Applications
  • Industrial Containers
  • Piping
  • Telecommunications
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Environmental Stress-Cracking Resistance (F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Tensile Impact Strength
ft·lb/in²
 ISO 8256
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Asrene® UB 5206H, Asrene UB 5206H, Asrene® , Asrene, AsreneUB5206H, UB 5206 H, UB 5206H, UB5206, 5206H, UB5206H, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Chandra Asri, PolyethyleneHighDensity, 5206UB
Features
Features may also be described by the following terms: Hexene Comonomer, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Impact Resistance, Good Stiffness.
Uses
Uses may also be described by the following terms: Piping, Pipe, Industrial Containers, Industrial Containers.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.